Lower cowling (GRP) NX6, NSR500V
€280.14
Frame Cover, Pair, Carbon, RGV250 VJ21 (Frame without Steering Damper)
These lightweight carbon covers fit over the frame and they are designed to protect against scratches and damage to the frame in the event of an accident.
Note that some examples of the VJ21 had no steering damper mounting boss. Also some other frames have the steering damper mounting boss in a different position. For those frames, ypou also can ise thsi set this set and cut a hole to suit.
See also Set: BPCC-7021 Frame Cover, Pair, Carbon, RGV250 VJ21 (Frame with Steering Damper)
Kit, Fairing Set, GRP, (Race) MC21, MC28, NSR250V
€610.53
Kit, Fairing Set, GRP, (Race) MC21, MC28, NSR250V
Modelled closely from the front fairing set taken off an actual NSR500V HRC factory machine, this kit has been designed to faithfully reproduce the appearance and silhouette of the NSR500V but to allow it to fit the NSR250 with correct mounting points and clearances. This fairing set can be installed with both the MC28 and the MC21, (and possibly the MC18, though we have not tried that model).
The set consists of the parts shown below All special mounting hardware and windscreen is provided. Note, you do not need to change the meter stay for either the MC21 or MC28 models to install this fairing which bolts to the stock meter and rear frame spar side stay and lower stay locations with all hardware provided.
The fairing can be used with stock and all TYGA exhaust systems including use with the specially designed 250V exhaust system EXCS-0047
We recommend installing this fairing set with seat set BPFS-0198 on the NSR250 to complete the NSR250V bodywork style. For a complete transformation of the whole bike, we also recommend exhaust system EXCS-0047 and EXSL-0083 or EXSL-0084.
TYGA no: BPFS-0197
SKU: hon-11056 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, High performance, Honda, NSR250, NSR250 MC21, NSR250 MC28Set full race system under belly with short stainless silencer with carbon cap, Honda MSX125 GROM
€480.85
.Set, Pipe, Full System, Underbelly, MSX125 Grom, Carbon Oval/Carbon End Cap, Short
This full race system has been specifically designed for the MSX125 to maximise power. Made in stainless steel with spring mounted carbon silencer this system increases performance, saves weight and enhances the looks of the bike. Sounds great too! ( A db killer is included)
Total weight of the set is 2300 grams
Performance and Dynograph
The blue trace shows the 100% standard Honda MSX125 Grom, compared to the red trace, which is after installing the TYGA Full System set (EXPS-0064) with no other changes to the stock bike.
A useful increase in peak power and further gains could probably be had with remapping etc.
Similar Products:
Please also see:
EXPS-0064 Stainless, Underbelly, with long silencer
<iframe width= 560 height= 315 src= https://www.youtube.com/embed/mSTQKSWArE0 frameborder= 0 allowfullscreen></iframe>
TYGA no: EXPS-0068
SKU: MSX-10348 Categories: ALL products, Exhausts, Exhausts, Exhausts, Honda, MSX125 2013 - 2015, MSX125 2021-, MSX125SF 2016 -2020, ShopBracket, Left Footrest, Ninja 250R/300R kawa 2013 -18
€161.49
Bracket, Left Footrest, Ninja 250R/300R kawa 2013 -18
TYGA no: 35063-0999
SKU: kaw-10158 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R/300R 2013 -, ShopSeat cowling hump TYGA, Suzuki RGV250 VJ21
€198.72
This seat cowling is to be used in our VJ21 kit, BPFS-0121 and BPFS-0122.
This product requires panels BPFT-9021R and L. for installation.
TYGA no: BPFT-9021HÂ Â
SKU: suz-10101 Categories: ALL products, Bodywork, Bodywork and carbon, RGV250 VJ21, Suzuki, Suzuki RGV250Top triple clamp set CNC silver, Honda VTR1000 SP1
€327.34
CNC machined top triple clamp with detachable ignition switch/lock holder for your Honda SP1. Designed and manufactured in house as a direct replacement for the standard top triple clamp. Fully functional steering lock.
Crafted from aircraft spec 6061-T6 aluminium, using high technology 3D machining, the TYGA clamp and ignition switch/lock holder set offer high strength while being lighter than the standard component, and offers an improved and individual look to your bike.
Carbon/kevlar headlight shroud (pair) GP-T
€100.33
Carbon/kevlar headlight shroud (pair) GP-T
TYGA no: BPKX-9433
SKU: hon-10543 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250, NSR250 MC21, NSR250 MC28, ShopWheel Bearing Set, Front MC18/21/28
€18.58
Replacement front wheel bearing. OEM quality assured
2x Bearings included
TYGA no: TYPP-0009
SKU: hon-10833 Categories: ALL products, Honda, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, Various parts, Various parts, Various parts