Used JDM Honda Headlights Refurbished (set)
€330.57
TYGA no: Used NC30 Headlights
SKU: hon-11532 Categories: ALL products, Electrical, Honda, RC36-2 -> RC30 replica products, Shop, Stocklist, various partsTriple clamp set CNC black, Honda CBR250 MC22 -> RVF400 fork
€673.59
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-1231
SKU: hon-11231 Categories: 4 stroke exhaust sets, ALL products, CBR250RR MC22, Exhausts, Honda, Shop, SilencersPassenger seat cover red/flad black, Honda MSX125 GROM
€132.00
Passenger Seat Cover, (GRP), MSX125 Grom.
This is the GRP version of our MSX125 passenger seat cowling in red with flat black number board as shown in the photos. Easy installation, with mounting hardware and trim supplied, this stylish cover will clean up the lines of your bike and make your bike stand out from the crowd.
This seat cowling is also available as BPCX-7128 in carbon fibre. See website for more details.
<a href= {{media url= wysiwyg/02-fitting-manual-seat-cover-bpfx-cx-7128-online-72148956.pdf }} target= _self >Click here for PDF</a>
TYGA no: BPFX-7128 R/F
SKU: MSX-10149 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2013 - 2015, ShopStay, Lever Stopper, KTM RC, Step Kit
€3.45
Stay, Lever Stopper, KTM RC, Step Kit
Replacement part for STAA-0024 and STAA-0124
TYGA no: BPSY-0150
SKU: ktm-10101 Categories: ALL products, CNC parts, CNC parts, CNC parts, KTM, RC 125/200, RC 390, Stock list, all modelsWater pump shaft/gear, Honda NSR250 MC28
€255.37
Water Pump Shaft/Gear, MC28
High quality hard anodized aluminium gear, on precision ground shaft.
Manufactured by T2 Racing in Japan.
Direct replacement for the standard plastic shaft/gear which is prone to cracking and causing catastrophic failure.
The shaft and gear can be disassembled should any parts ever need replacing.
Note that this part is for MC28 only. For MC18 and MC21 please see TPER-5003
TYGA no: TPER-5004
SKU: hon-10623 Categories: ALL products, High performance, Honda, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, Various partscarbon rear hugger wide wheel, RVF400
€308.02
Rear Hugger (Carbon), RVF400 NC35, Wide Type, Assy.
New stylish design prevents water and road debris from the rear wheel reaching the rear shock and other components. Please note this model is designed specifically for the NC35 RVF400 fitted with a wide 160 section tyre whre the stock model hugger BPCH-7014 is too narrow. Note this product is not suitable for bodywork which uses the stock subframe such as the BPFS-0078 and all stock shaped rear ends where the rear fender may contact with the hugger. This product is sutable for NC35s fitted with TYGA RC211V and T13 Style bodywork kits which have a high style seat cowling with no fender for the hugger to fit in. Note we make similar products:
BPCH-7004, NC30 150/18 tyre size
BPCH-7014 NC35 150/17 tyre size
TYGA no: BPCH-7024
SKU: hon-10563 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, RVF400RR NC35, ShopClutch lever titanium, NC29 NC30 NC35
€29.95
CNC machined out of solid billet. Dog legged lever for Honda 4 stroke models such as NC23, 29, 30, 35 etc and similar models. (See alternative straight version for NSR250 and CBR250RR).
TYGA no: LEVC-9042Â
SKU: alg-10056 Categories: ALL products, CBR400RR NC23, CBR900RR 1992- 95, CNC parts, CNC parts, CNC parts, Honda, RVF400RR NC35, Shop, VFR400RR NC30Set, mirror blanking plates L&R CNC black, KTM RC series
€57.41
Wheel, Aluminium Spacer Kit, KTM Duke – RC Series
Update your bike with this great TYGA performance, KTM power part!!
This comprehensive kit is specifically designed for the KTM racer in mind. The wheel spacers have been cleverly designed to be captured in the seals (instead of being loose as they are with stock set up), enabling quick and easy wheel removal and installation; essential when every minute counts to get out in time for a session or race.
In addition, the spacers are all made out of high quality aluminium (6061-T6) instead of steel giving a useful saving of 65% in important unsprung weight.
Finally, we provide a complete set of high quality Japanese Koyo wheel bearings to replace the not so good ones supplied from the factory.
All in all, a useful and inexpensive upgrade. Now you really are ready to race!
Included in this kit are the following components:
Bearings
front wheel x 2
rear wheel x 2
sprocket carrier x 2
seals
front wheel x 2
rear wheel x 2
spacers
front wheel, left, right and centre
rear wheel, left, right, centre and sprocket carrier
Note: This product is only sold as a complete kit, and individual items are not available separately, sorry.
TYGA no: TYLY-1185
SKU: ktm-10191 Categories: ALL products, CNC parts, CNC parts, CNC parts, Duke 390 2017 -, KTM, RC 125/200, RC 390, Shop, Various parts