Set pipe Full race system WSS300 (race), KTM RC390
€1,155.39
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: EXPS-0112
SKU: ktm-10147 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all modelsCarbon belly pan, KTM Duke 390
€244.43
Belly Pan, (Carbon), KTM390 Duke
This lightweight carbon belly pan, complete with mesh weighs less than the stock one and adds style to your ride.
Please note, this product fits the 390 only. For the 125 and 200 Duke see BPCL-7131
Update your bike with this great carbon product, direct replacement of the original part
Lower cowling stock shape right, CBR250RR MC22
€108.39
Exact copy of right side of stock MC22 shape lower to be used either with stock shape or Tyga RC211V style bodywork.
Top Triple clamp CNC silver, Aprilia RS250 kit
€288.43
CNC machined top triple clamp with detachable ignition switch/lock holder for your Aprilia RS250.
Designed and manufactured in house as a direct replacement for the standard top triple clamp.
Fully functional steering lock.
Crafted from aircraft spec 6061-T6 aluminium, using high technology 3D machining, the TYGA clamp and key holder set offer high strength while being lighter than the standard component, and looks fantastic!
Only fits the MK2 RS250
TYGA no: TYLY-0053
SKU: apr-10017 Categories: ALL products, Aprilia, CNC parts, CNC parts, RS250, ShopSet, pipe full race system round stainless silencer LH exit, VFR750F gen 4, 94-97
€1,107.23
Set, pipe full race system round stainless silencer, VFR750F gen 4, 94-97
This TYGA Full Race System has been designed with no compromises and maximum power in mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits the 1994-1997 Generation 4 VFR750.
For unsurpassed looks, sound and performance, this system can be used with a number of our 2″ slip on exhaust silencers
See also our sets with silencer included:
EXPS-0122 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Oval Carbon/Carbon End Cap Silencer
EXPS-0123 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Oval Stainless Silencer
EXPS-0124 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Round Aluminium Silencer
EXPS-0125 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Round Carbon Silencer
EXPS-0126 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Carbon/Carbon End Cap Silencer
EXPS-0127 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Aluminium/Carbon End Cap Silencer
EXPS-0128 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Stainless Silencer
EXPS-0129 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Stainless/Carbon End Cap Silencer
EXPS-0130 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97 Maggot Silencer
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing in at only 4.15 kgs (not including the silencer).
**Important Note**
The TYGA system keeps the use of the side stand, however, the centre stand and pillion foot rests must be removed prior to installation.
TYGA no: EXPS-0128
SKU: hon-11021 Categories: ALL products, Exhaust systems, Exhaust systems, Exhausts, Honda, RC36-2 -> RC30 replica products, Shop, VFR750F Gen 4, 94-97Set, Pipe, Full Race System, High Level, MSX125 2021-, Moto Maggot
€451.95
Carbon front fender “sport style”, Honda MSX 125 (MK1 MK2) Monkey 125 2018-
Sports style Carbon front fender to give your Monkey 125 or MSX125 Grom* a clean and unique appearance. Easy install with mounting bolts provided.
See also BPFF-7142 for GRP version.
*Note that when this fender is installed on the MSX125 Grom, it uses using just the four bolts in front of the fender and the two mounting holes behind the fork leg for the stock fender on the Grom are not used. For the Monkey, it mounts on the fork guard mounting holes.
Brake lever CNC black shorty , Brembo flip up type
€47.37
CNC machined from solid billet, as used by World Moto 2 Team Stop & Go, this Shorty flip up lever is the ‘half lever’ replacement, compatible with the Brembo RCS19 or RCS16 radial master cylinder and at this price is ideal for keeping as a spare or for replacement.
TYGA no: LEVB-2011
SKU: alg-10132 Categories: 848 / 1098 / 1198, ALL products, CBR1000 2004-7, CBR1000 2008-11, CBR1000 2012-, CBR600RR 2003- 4, CBR600RR 2005- 6, CBR600RR 2007- 16, Desmosedici RR, Ducati, GSX-R1000 K5-K6, GSX-R1000 K7-K8, GSX-R1000 K9-K10, GSX-R1300 Hayabusa, GSX-R1400 Hayabusa, GSX-R600/750 K6-K7, GSX-R600/750 K8-K10, Honda, Kawasaki, Monster, Shop, Suzuki, Universal parts, VTR1000Sp1SP2, Yamaha, YZF-1000 R1 2002- 6, YZF-1000 R1 2007- 8, YZF-1000 R1 2009- 14, YZF-600 R6 2006- 7, YZF-600 R6 2008- 12, ZX10R 2011 -15Carbon chain guard, Cagiva Mito125/EV/SP525
€95.39
Carbon chain guard, Cagiva Mito125/EV/SP525
This carbon chain guard replaces the stock plastic part which, after 20 years, is starting to look a bit faded and battered on most Mito’s.
By replacing it with this beautiful carbon part, your swing arm will look fresh and tidy!