Carbon seat Cowling , NX5 RS250R (1995 NSR250 style)
€1,096.23
Kit, Fairing Set, Carbon, Honda NX5 RS250R (1995 NSR250 Style)
Complete Carbon Bodywork kit which consists of the following products:
Upper Cowling Race, Carbon, NX5 RS250R (Late Model Style) (BPCU-9036)
The Carbon upper fairing is modelled off the 1995 NSR250 racer but will fit any NX5 which has the ram air through the fuel tank system.
Lower Cowling, Carbon, NX5 RS250R (Late Model Style) (BPCL-9036)
The Carbon lower fairing is modelled off the ram air version of the NX5 RS250R but will fit any NX5 which uses a stock upper as far as we can tell.
Seat Cowling Race, Carbon, NX5 RS250R (1995 NSR250 Style) (BPCT-9036(p))
This seat cowling is modelled on the 1995 factory NSR250 racer look as ridden by Ukawa, Okada, Romboni, Jacque etc. and is a direct fit for the NX5. The seat cowling uses a special seat support which bolts to the subframe using existing mounting lugs and the seat cowling is covered underneath for streamlining and protection of the PGM and connectors.
Seat Support NX5 RS250R (BPCX-9036)
Screen Clear NX5 RS250R (1995 NSR250 Style) (SCRE-0176)
Made to order, takes approx 1 to 2 weeks to be ready for shipping
TYGA no: BPCT-9036
SKU: hon-10949 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, ShopCarbon Rear hugger with chainguard, Suzuki RGV 250 VJ23
€216.82
Rear Hugger/Chain Guard (Carbon), VJ23 RGV250
The VJ23 RGV250 is the only RGV250 model which does not have a rear hugger as standard and as a result, all the road filth and rain tends to collect around the rear shock and under side of the seat cowling. TYGA Performance have developed this carbon hugger as a solution to the dirt issue while making the swing arm/rear wheel part of the bike more attractive. Designed to fit onto the contour of the VJ23 swing arm’s fabrication and lock into position by a rub underneath, the TYGA hugger incorporates the rear chain guard too, using the chain guard’s mounting holes on the left to hold it securely in place. On the right side, it is held on by a cable tie through the rear brake line guide and at the front by an M4 bolt which is requires drilling and tapping of the swing arm by the customer to install this product.
IMPORTANT, note that due to the VJ23 never having the option for a rear hugger, there is no position provided on the swing arm to mount the hugger at the front and it is necessary to drill and tap an M4 hole in the swing arm and use a cable tie to provide a good level of support for the hugger. See photos 7 and 8 for details on what is required to install this product.
Complete with all fitting hardware.
Handlebar clamp Silver, Honda MSX125 GROM
€52.45
Handlebar clamp CNC machined from 6061 T6 aluminium. Light weight and stylish. Available in two colours, silver or black.
Simple replacement for stock clamps, using stock bolts and bolt caps.
TYGA no: TYLY-0095
SKU: MSX-10081 Categories: ALL products, CNC parts, CNC parts, CNC parts, CNC parts, Honda, Monkey 125 2018-, MSX125 2013 - 2015, MSX125 2021-, MSX125SF 2016 -2020, ShopSpring puller (type 2), universal
€21.68
Handy, tough, spring puller ideal for removal of exhaust mounting springs in those difficult to get places. Say goodbye to slipping vice grips and twisted strands of wire.
Also gives your race pit a professional edge for that psychological advantage over the competition!
We have 2 type’s, also see product alg-10009.
A must for every workshop!!
TYGA no: puller1
SKU: alg-10239p Categories: 2 stroke exhaust sets, 4 stroke exhaust sets, ALL products, By product, Cagiva, Exhausts, Exhausts, Honda, Mito 125, Monkey 125 2018-, MSX125 2013 - 2015, MSX125SF 2016 -2020, NSR125 JC22 1994 - 2003, NSR150SP, NSR250 MC18, RD350LC 4L0, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS125, RS250, Shop, Suzuki, Tools, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30, Yamaha, YZ250 2005-15Pillion seat cover “Black”, KTM RC390 2022 –
€122.50
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: BPFX-7731black
SKU: ktm-10210 Categories: ALL products, Bodywork and carbon, Exhausts, KTM, RC390 2022-, Stock list, all modelsGasket, Clutch Cover, Ninja 250R 2008 -12
€11.80
Gasket, Clutch Cover, Ninja 250R 2008 -12
TYGA no: 11009-1872
SKU: kaw-10225 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R 2008- 12, ShopExhaustset stainless steel maggot silencer, Honda CBR300
€393.26
The TYGA Full Race System has been designed with maximum power mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. For unsurpassed looks, sound and performance, this system is supplied with silencer EXSL-3013. If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing approx 2.5 kg instead of the stock systems 8kg.
This system may not comply to specific country noise emission regulations and is not homologated for street use. Actually it is extremely loud so be warned!
TYGA no: EXPS-0054Â
SKU: hon-10370 Categories: 4 stroke exhaust sets, ALL products, CBR300R 2014-, Exhausts, Honda, ShopCarbon front fender, monster style satin, Honda MSX125 Grom 1st/2nd/3rd gen.
€192.39
Front Fender, (Carbon) Monster Style, MSX125 Grom. This Monster front fender looks much neater than the slab styled Honda part. Made in lightweight carbon fiber, it actually weighs half the stock plastic one and saves a whopping 200g! This fender is supplied in a satin finish. We also do a high gloss version, BPCF-7128g
TYGA no: BPCF-7128f
SKU: MSX-10070 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Honda, MSX125 2013 - 2015, MSX125 2021-, MSX125SF 2016 -2020, Shop