Steering stopper MiniRacerXtreme, Honda MSX125 GROM
€17.45
Steering Stopper, MSX125 Grom
This steering stopper is designed specifically for our MRX project to limit steering movement to the confines of the body kit. However, this can be used separately with the standard set up for anyone wanting to limit steering movement. Easy to install and fits in minutes.
Fitting Instructions:
Remove the front brake stay and the horn wiring stay from the lower triple clamp temporarily. Install the steering stopper as shown in the photo Reinstall the stays in the standard position holding the steering stopper in place. Test to make sure the steering operates smoothly and no wires, cables or hoses are getting pinched or rubbing on anything they shouldn’t do.
TYGA no: BPSY-0122
SKU: MSX-10270 Categories: ALL products, By model, Honda, MRX, MRX, MSX125 2013 - 2015, MSX125 GROM, MSX125SF 2016 -2020, ShopFront Fender, (GRP), Unpainted, MSX125
€80.45
Front Fender, (GRP) Unpainted, Stock Shape, MSX125SF
Direct replacement for original part.
This is a part made in fiberglass (GRP) which has been primed in PU. Some minor preperation is required prior to paint.
This Front Fender has the same shape as the second generation MSX125SF stock front fenders, and will also fit the first generation MSX125 /Grom
TYGA no: BPFF-7428
SKU: MSX-10397 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, MSX125 GROM, MSX125SF 2016 -2020Bolt, Clutch Spring, MC28R
€1.46
Bolt, Clutch Spring, MC28R
TYGA no: 93404-06022-00
SKU: hon-11100 Categories: ALL products, High performance, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28Rear sprocket aluminium gold, NSR250 MC18 / MC21
€67.41
Upgrade your bike with TYGA Sprockets.
Designed and machined in house from super strong 7075 T6 aluminium, and then anodized in gold colour for superior corrosion and abrasion resistance.
TYGA no: TYSR-0104-37T - TYSR-0104-44T
SKU: hon-10397 - hon-10404 Categories: ALL products, By product, Honda, NSR250 MC18, NSR250 MC21, Sprockets, Sprockets, SprocketsTank filler cap racing , Yamaha/Ducati
€69.87
Tank Filler Cap, Keyless, Racing Type, Yamaha/Ducati
This keyless racing fuel tank filler cap is CNC machined from billet alminium and anodised black with a laser etched TYGA logo. Designed with finger tabs for easy removal while wearing gloves
Supplied complete with seals and mounting hardware, it can be installed in minutes. This product is suitable for the following models:
YAMAHA
- R6 (All Years
- R1 (All Years)
- FZ-6 (All Years)
- FZ-1 (All Years)
- FZR1000 (All Years)
- FZR750 (All Years)
- FZR400 (All Years)
- FZR250 (All Years)
- TZR250 3MA, 3XV
- YSR50 (All Years)
- YZF1000 (1997-98)
- YZF600 (1994-97)
- YPVS-F2 RD350/RZ350 (1986)
Ducati :
- 748 (all years)
- 851 (all years)
- 888 (all years)
- 916 (all years)
- 996 (all years)
- 998 (all years)
- Monster S4R S2R etc.. (all years)
- 600 750 and 900 SS (all years)
- 600 750 900 ST2 ST4 (all years)
- 848, 1098, 1198 (all years)
- Desmo RR
TYGA no: TYLY-0111
SKU: alg-10191 Categories: 848 / 1098 / 1198, ALL products, Desmosedici RR, Ducati, Monster, Shop, Tank fillers, Yamaha, YZF-1000 R1 2002- 6, YZF-1000 R1 2007- 8, YZF-1000 R1 2009- 14, YZF-600 R6 2006- 7, YZF-600 R6 2008- 12Side Cowling, Left, Race, Carbon Clearcoated, KTM RC390 WSS300
€454.95
Side Cowling, left, Race, Carbon Clearcoated KTM RC390 WSS300
Replacement Side Cowling, Left, GRP, Race, WSS300, MUST be used with KTM WSS300 hardware
see also:
BPFU-7331R (GRP)
BPCU-7331UR (Carbon Unpolished)
Upper cowling race, Suzuki RGV 250 stock
€253.10
Upper Cowling (Race, GRP), VJ22, Stock Shape, Assy.
This upper cowling is modelled from the origial stock VJ22 shape and is suitable for all race classes but particulary those where the you need to keep the stock silhouette. Note that this panel splits the fairing into two parts for ease of removal and fitment at the race track and is to be used with BPFL-9226 lower cowling to complete the fairing. Constructed with epoxy resin and multi layer 200 gram mat; do not confuse this with budget race glass made with polyester and chopped strand just because the price is right!
It uses stock windscreens, SCRE-0061, SCRE-0062, SCRE-0129 and SCRE-0130.
NOTE: This product is compatible with lower cowling BPFL-9226. Will not fit stock Suzuki lower cowling.
Only available as race version, no street version with light provison.
TYGA no: BPFU-9226
SKU: suz-10092 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, RGV250 VJ22, Shop, SuzukiSilencer kevlar/carbon SHORTY 60mm 2 stroke
€156.20
This high quality shorty (55mm shorter than our other silencers) lightweight silencer (0.40kg) is made from CNC machined end caps joined by a Carbon/Kevlar fiber tube. It has a built-in sealing ‘O’ ring and is supplied with stainless steel bolts and washers for fitment.
Note this product is intended to be used with our exhaust chambers (EXCS-****) and is not a direct replacement part for the stock or other manufacturers’ silencers. If you wish to install our two stroke silencers with a stock chamber, we offer a mounting flange (code TPER-0052 and TPER-0022) in either stainless or mild steel which can be welded onto the existing chamber and suitable for directly bolting our two stroke silencers to an existing non TYGA chamber. The flange is of course not required if intended to install to a TYGA chamber.
Compatible Products:
All Tyga Performance Two Stroke chambers sets. Remember to order the correct number of silencers for a complete system!
Other Alternative Products:
EXSL-0065 Shorty Carbon
EXSL-0067 Shorty Aluminium
EXSL-9005 Aluminium
EXSL-0003 Carbon
EXSL-0004 Carbon/Kevlar
TYGA no: EXSL-0066
SKU: alg-10259 Categories: 2 stroke exhaust sets, ALL products, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Mito 125, NSR125 JC22 1994 - 2003, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, RD350LC 4L0, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS125, RS250, Shop