Carbon/kevlar tube round 58 x 290 mm, TYGA 2 stroke
€62.59
Made from high TG resin and 2/2 weave twill carbon/kevlar cloth, this replacement tube is suitable for the following TYGA Performance exhaust silencers.
It is also suitable for other manufacturers’ silencers of the same dimensions.
TYGA no: EXTC-0005
SKU: alg-10247 Categories: 2 stroke exhaust sets, ALL products, Aprilia, Cagiva, Carbon tubing silencer, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Mito 125, NSR125 JC22 1994 - 2003, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS125, RS250, RS250R NF5 / NX5, Shop, Universal partsLower cowling grp, Ninja 400
€200.66
Lower Cowling, (GRP), Ninja 400
Replacement Lower Cowling for TYGA Race Bodywork kit BPFS-0175
TYGA no: BPFL-7040
SKU: kaw-10143 Categories: ALL products, Bodywork and carbon, Kawasaki, Ninja 400R 2018-Side Cowling, Left, Race, Carbon Unpolished, KTM RC390 WSS300
€379.14
Side Cowling, Left, Race, Carbon Unpolished, KTM RC390 WSS300
Replacement Side Cowling, Left, GRP, Race, WSS300, MUST be used with KTM WSS300 hardware
see also:
BPFU-7331L (GRP)
BPCU-7331L (Carbon Clearcoated)
TYGA no: BPCU-7331UL
SKU: ktm-10162 Categories: ALL products, Bodywork, KTM, RC 390, WSS300 bodyworkTemp gauge “race”, Honda 1/8″ NPT
€23.55
Temp Gauge, Race, Honda 1/8″ NPT
Stand alone temperature gauge for race use. Ideal for monitoring engine coolant temperature.
Pre-fitted with 1/8″ NPT adapter. Just remove the standard temperature sensor and screw in this replacement.
Displays temperature in Centigrade, up to 99.9C
Race use only. No back light function.
Supplied with 2x LR44 batteries (not fitted).
**NOTE** Some machines may use the temperature reading from the standard sensor, in which case alternative mounting may be required.
Fits:
RVF400 NC35
VFR400 NC30
NSR250 (All models)
NSR150SP
CBR400RR NC29
Also fits all Honda Motorcycles who are using thermo units with OE part numbers 37750-PC1-004 and 37750-KV3-951
TYGA no: TELC-0004
SKU: alg-10324 Categories: ALL products, By model, CBR400RR NC29, Honda, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, RVF400RR NC35, Shop, Universal parts, Various parts, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30Lower cowling GP-T, Honda NSR250 MC21/MC28
€183.50
Lower Cowling (GRP), MC21, MC28, GP-T, Assy.
This product is designed to be used with BPFU-9033 as part of the Bodywork set BPFS-0137
.
Designed in-house by TYGA Perforance and using 15 years experience of developing fairings for the NSR250, this fairing is lightest and most stylish yet. The design allows for the extra width of an HRC radiator while at the same gives maximum clearance with the track at high angles of lean. Other features include a vent underneath and high quality lamination by our skilled craftsmen. Weight is under 1 kg but strength retained using high strength epoxy resins and good design. See also carbon version BPCL-9033.
It is supplied with spacers to place between fairing and rear lower mounts to ensure clearance with exhaust chambers.
Compatible products:
This product must be used with BPFU-9033
This lower cowling is designed to be used with stock or race exhaust systems though some spacing may be necessary to get clearance with chambers:
1. stock systems, fit with no spacing but will need a small part of the indent on the lower vent removed to clear the chamber. We can modify the lower to fit the stock chambers if requested
2. Tyga chambers require some spacing but no cutting. On some systems (particularly MC28) no spacing is necessary
3. Other systems, can not advise, but should require only spacing or possibly cutting of front of lower where front cylinder header exits.
TYGA no: BPFL-9033
SKU: hon-10532 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250, NSR250 MC21, NSR250 MC28, ShopBoyesen Dual reeds, Aprilia RS125
€48.76 €46.52
Boyesen Dual reeds, Apriia RS125
Boyesen Power Reeds use a patented dual-stage fiberglass design for more airflow, more air velocity and more overall power.
Boyesen dual-stage power reeds produce a better throttle response right off idle and through the mid-range when compared to the traditional Power Reed setup.
1 engine = 1 set
TYGA no: boyesen2
SKU: alg-10375 Categories: ALL products, Aprilia, Exhausts, High performance, RS125, Shop, Various partsSilencer stainless steel Motogp style (4 stroke) 54mm maggot
€228.20
Maggot silencer with 54 mm. inside inlet diameter. No mounting lug.Includes silencer clamp, mounting springs and spring hooks to weld onto existing exhaust tailpipe. Tyga Moto Maggots are now available in five sizes, Mini, Midi, Moto, and Monster Mega Monster with inlet sizes of 35 mm., 43 mm., 50.8 mm., 54 mm and 64mm. respectively. As well as the basic five sizes, we have listed here some of the model specific Maggots which have lugs welded to them to suit their specific application.
Of course, these can be mounted to other exhausts and offer an alternative to the basic Maggots.
All the silencers shown here are supplied with springs, spring hooks, and where applicable, mounting clamps.
<a title= Maggot 54mm href= {{media url= wysiwyg/05-maggot-exsl-6013-54m-m-ebc7f34e.PDF }} target= _self >Clcik here for PDF</a> <iframe width= 560 height= 315 src= https://www.youtube.com/embed/hfUVXzAkxmM frameborder= 0 allowfullscreen></iframe>
TYGA no: EXSL-6013
SKU: alg-10115 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, Exhausts, Honda, RVF400RR NC35, Shop, Silencers, VFR400RR NC30Triple Clamp Set, CNC Black, NC35 Forks to fit MC28
€588.29
Triple Clamp Set, CNC Black, NC35 Forks to fit MC28
This CNC machined triple clamp set has been modified from the ‘normal’ NC35 design to allow MC28 owners to fit NC35 forks to their machine.
The difference between the NC35 clamps and these is that we have replaced the steering shaft with one of suitable length for the MC28.