Kit fairing set GRP RC30 style “street”, Honda VFR400 NC30
€776.03
This is the all GRP seat cowling used in the NC30 RC211V style seat cowling kits, BPFS-0028 and BPFS-0034.
This product is suitable as a replacement seat cowling in the event of damage to the one in the set. It is also ideal for somebody wishing to custom fit it to another model. Please note it will need modifying to fit anything other than the NC30.
To be used with:
subframe TYLY-0025
battery box TYLY-0026
taillight BPLT-0013
registration/license plate holder BPCX-9007
TYGA no: BPFS-0227
SKU: hon-11428 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, Shop, VFR400RR NC30Stud, Exhaust #2 8×22, MC28
€3.45
Stud, Exhaust #2 8×22, MC28
TYGA no: 90035-KV3-950
SKU: hon-11131 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28Set pipe Full race system WSS300 (race), KTM RC390
€1,155.39
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: EXPS-0112
SKU: ktm-10147 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all modelsTop triple clamp CNC black , Honda NSR250 MC18 1988
€235.86
Top Triple Clamp Set, CNC Black, NSR250 MC18, (1988)
CNC machined TYGA top triple clamp with detachable ignition switch/lock holder for your NSR250 MC18, (1988)
Designed and machined in house by TYGA, as a direct replacement for the OEM top triple clamp. FEA tested and developed for increased strength without unnecessarily increased weight.
Crafted from aircraft spec 6061-T6 alloy, the top triple clamp is ready to fit.
The detachable ignition switch/lock holder is positioned to allow use of the steering lock, but can be removed for race use.
TYGA no: TYLY-1070
SKU: hon-10704 Categories: ALL products, CNC parts, CNC parts, Honda, NSR250, NSR250 MC18, Stock list, all modelsTYGA / Kitaco Power up kit carbon , Honda MSX125 GROM
€750.67 €675.60
TYGA/KITACO Power Up Kit, Carbon Type
This power up kit is designed to give a significant power boost over stock. Using TYGA Performance and KITACO products, the power of the MSX125 Grom is increased by 25%. Below is the dyno graph. STD vs our full system with carbon silencer, Kitaco type 2 camshaft, i-map (setting #3). Similar results were found with the Moto Maggot and stainess type silencers.
Parts
This product consists of the components shown below, namely:
EXPS-0041 Set, Pipe, Full Race System, MSX125 Grom, Carbon Oval/Carbon End Cap
KIT-300-1432010 KITACO Type 2 Camshaft
KIT-763-1432010 KITACO i-Map. Fuel Injection Controller
For those who want a Type 1 camshaft, please put this in the commentbox at check out.
Option:
KIT-763-0500900 i-Map interface cable. To adjust the i-map for special setting. Software available on KITACO website.
Description:
Fitting this Power Up Kit to your Honda MSX125/GROM gives a significant increase in top end performance and over rev. Peak hp is moved from 7,000rpm (std) up to 8,000rpm, with a 1.6hp gain at peak.
Fitting the i-Map Fuel Injection Controller is a necessary modification to avoid the engine running lean and being damaged. Running the KITACO Type 2 camshaft without the i-Map is NOT an option!
The wire harness requires modification and the documents are included with the kit, or can be viewed here: http://www.kitaco.co.jp/data/product/link/instaling_manual/kitaco_installing_manual_grom_imap.html
The i-Map is shipped with “setting #3” activated. This is the basic map for this kit, but the map can be modified using the optional i-Map interface cable and software downloadable from the KITACO website:
i-Map Fuel Manager: http://www.kitaco.co.jp/dlservice.html
TYGA no: TPER-0095
SKU: MSX-10305 Categories: ALL products, Exhausts, Exhausts, High performance, High performance, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopDecal set, type 8 pearl white scheme, Honda MSX125 GROM
€53.08
Decal Set, MSX125, Type 8, 2015 Pearl Himalaya White Scheme This set comprises of a complete set of all the OE Honda decals required for the painted panelson the MSX125. Note it includes the decal ‘MSX125’ not ‘Grom’ as used in some markets.
TYGA no: STIC-0026V
SKU: MSX-10315 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopKoppelingdeksel Takegawa voor Honda MSX125
€442.17 €373.83
Koppelingdeksel Takegawa voor Honda MSX125
High performance with high quality and durability.
Specially designed to have quick access to the clutch.
Also room for a thermostat and in/outlet for a oil cooler.
TYGA no: 02-01-0150
SKU: msx-10376 Categories: ALL products, High performance, High performance, Honda, MSX125 2013 - 2015, MSX125 GROM, MSX125SF 2016 -2020Seat Cowling, Undertray, Street, (Carbon), Cup Style, KTM RC125, RC200. RC250, RC390
€180.64
Seat Cowling, Undertray, Street, (Carbon), Cup Style, KTM RC125, RC200. RC250, RC390
This is a replacement part for set BPFS-0142. Please note that the following parts are required to complete the set:
BPCT-7331A Seat Cowling, Top
BPCT-7331B Undertray
BPSP-0007 Seat Pad
TYGA no: BPCT-7331B
SKU: ktm-10115 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, KTM, RC 125/200, RC 390