Carbon race airbox MK1/MK2, Aprilia RS250
€451.00 €412.40
Carbon race airbox MK2, Aprilia RS250 (apr-10079)
Our race airbox is inspired by the GP road racing technology, taking advantage of a front air intake and all available space within the engine compartment.
And by using the lower part of the fuel tank as closing to increase the volumetric capacity of which becomes 9.5 lt against 6.2 lt of the standard component ( 53%).
The air intake (Snorkel) is positioned in the front to be able to suck a greater amount of air and with less turbulence than the positioning adopted in origin ( in the back)
Its shape also was designed using the calculation FEM (Finite Element Method) to minimize the load losses and therefore increase performance in the complete range of the RPM.
The kit also includes a carbon cover to be mounted close to the air intake to prevent suction of hot air.
All this is mainly reflected in an increase in engine performance, as shown below on the Dyno graph.
Greater maximum power ( 3 hp *)
Better throttle response
Higher max. RPM ( 500 rpm)
A GP “sound”
Improved access for maintenance
Jets #310 – #320(*)
Also be using Carbon you will have weight reduction of around 50% (465 grams compared to 970 grams OEM).
The filter is washable and gives better performance then original
The best aftermarket race airbox in the market, order with confidence.
* Standard engine
Please note, the rubber airbox manifolds are not with the airbox. You have the reuse the original ones.
TYGA no: 004800KT/P.
SKU: apr-10079 Categories: ALL products, Aprilia, Bodywork and carbon, High performance, High performance, RS250, ShopTail, Side Panel, Right, Green, Ninja 250R/300R 2013 -18
€70.70
Tail, Side Panel, Right, Green, Ninja 250R/300R 2013 -18
TYGA no: 53065-5019-777
SKU: kaw-10172 Categories: ALL products, Kawasaki, Ninja 250R 2008- 12, ShopCarbon chain guard "stock", Honda NSR250 MC18
€114.99
Chain Guard, Carbon, Stock Shape MC18
Carbon chain guard for NSR250 MC18 (1988-1989). Made to the same dimensions as the original one, it is easy to install and will give your bike a fresh and sporty appearance.
TYGA no: BPCX-7036
SKU: hon-10650 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC18, ShopCarbon rear hugger stock shape, Honda MSX125 2021-
€274.77
Carbon front fender “sport style”, Honda MSX 125 (MK1 MK2) Monkey 125 2018-
Sports style Carbon front fender to give your Monkey 125 or MSX125 Grom* a clean and unique appearance. Easy install with mounting bolts provided.
See also BPFF-7142 for GRP version.
*Note that when this fender is installed on the MSX125 Grom, it uses using just the four bolts in front of the fender and the two mounting holes behind the fork leg for the stock fender on the Grom are not used. For the Monkey, it mounts on the fork guard mounting holes.
TYGA no: BPCH-7048
SKU: msx-10477 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2021-, ShopClutch Pressure Plate, MC28 SP
€59.69
Clutch Pressure Plate, MC28 SP
TYGA no: 22351-KV3-780
SKU: hon-11151 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, NSR250, NSR250 MC28Screen RC211V, Tyga CBR/VFR/RVF
€52.00
Screen RC211V, Tyga CBR/VFR/RVF
This screen fits the TYGA bodywork.
Bodykit complete MiniRacerXtreme, Honda MSX125 GROM
€1,540.86
Bodywork Set, (GRP), MRX, MSX125 GromThis kit is the ultimate modification for your MSX125 Grom converting it to a mini racer for the road or track depending on how the mood takes you. The kit is comprehensive and is supplied with all mounting hardware and components including, headlight, handlebars, top triple clamp and mirrors*.The panels are made from high quality GRP using high quality epoxy resins for strength and lightness and are primed ready to apply paint. The shape lends itself to most liveries and ideal for promoting your business or race team.With improved ergonomic and aerodynamic performance, this kit will increase top speed and agility as well as give a whole new riding experience for the MSX125 Grom. Ideal for buddying road racers for honing racecraft and riding skills, or just a fun project to stand out from the crowd, the MRX will put a smile on everyone’s face.*Note, turn signal indicators, tail tidy, front fender are not included with kit but are available on this site. We recommend installation of rear sets and exhausts but they are not strictly necessay.Our MRX set only fits the first model MSX 2013-16<iframe width= 560 height= 315 src= https://www.youtube.com/embed/8eiU-sMhpRI frameborder= 0 allowfullscreen></iframe>
Taper Spring, KTM RC Step Kit
€1.93
Taper Spring, KTM RC Step Kit
Taper Spring, KTM RC Step Kit
Replacement taper spring for STAA-0024 and STAA-0124
TYGA no: TASG-0001
SKU: ktm-10102 Categories: ALL products, CNC parts, CNC parts, CNC parts, KTM, RC 125/200, RC 390, Stock list, all models