Kit, Complete Body Set, Stock Shape, with Fuel Tank, NC30, Painted Type 1
€2,957.86
Fuel Tank, Carbon, VFR400R NC30
Top quality reproduction of the steel NC30 fuel tank in carbon fiber. This product is a direct replacement for the stock NC30 fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
TYGA no: BPFS-0219
SKU: hon-11402 Categories: ALL products, Bodywork and carbon, Carbon, Honda, Shop, VFR400RR NC30Clutch Pressure Plate, MC28 R
€38.29
Clutch Pressure Plate, MC28 R
TYGA no: 22351-KV3-000
SKU: hon-11152 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, NSR250, NSR250 MC28Tank filler cap racing , Suzuki 4 hole
€69.87
Tank Filler Cap, Keyless, Racing Type, Suzuki 4 Hole
This keyless racing fuel tank filler cap is CNC machined from billet aluminium and anodised black with a laser etched TYGA logo. Designed with finger tabs for easy removal while wearing gloves
Supplied complete with seals and mounting hardware, it can be installed in minutes. This product is suitable for Suzuki sportsbike models which have 4 bolt mounting arrangement. See also the 3 hole model we supply (If in doubt, remove your existing filler cap to see which bolts actually mount to the tank and which ones are dummy ones for the outer ring only). Suitable for the following models:
- RGV250 VJ21, VJ22 and VJ23
- GSXR600 (1997 – 2003)
- GSXR750 (1996 – 2003)
- GSXR1000 (2001 – 2002)
- GSXR1300 (1999 – 2007)
- GSX600F (1998 – 2001)
- GS600F (2000 – 2001)
- GSF1200/Bandit 1200 (2001 – 2004)
- SV650 (1999 – 2002)
- TL1000S/R (All Years)
See also Suzuki 3 hole pattern
TYGA no: TYLY-0112
SKU: alg-10192 Categories: ALL products, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, Shop, Suzuki, Suzuki RGV250, Tank fillers, Various parts, Various partsTank filler cap racing , Yamaha/Ducati
€69.87
Tank Filler Cap, Keyless, Racing Type, Yamaha/Ducati
This keyless racing fuel tank filler cap is CNC machined from billet alminium and anodised black with a laser etched TYGA logo. Designed with finger tabs for easy removal while wearing gloves
Supplied complete with seals and mounting hardware, it can be installed in minutes. This product is suitable for the following models:
YAMAHA
- R6 (All Years
- R1 (All Years)
- FZ-6 (All Years)
- FZ-1 (All Years)
- FZR1000 (All Years)
- FZR750 (All Years)
- FZR400 (All Years)
- FZR250 (All Years)
- TZR250 3MA, 3XV
- YSR50 (All Years)
- YZF1000 (1997-98)
- YZF600 (1994-97)
- YPVS-F2 RD350/RZ350 (1986)
Ducati :
- 748 (all years)
- 851 (all years)
- 888 (all years)
- 916 (all years)
- 996 (all years)
- 998 (all years)
- Monster S4R S2R etc.. (all years)
- 600 750 and 900 SS (all years)
- 600 750 900 ST2 ST4 (all years)
- 848, 1098, 1198 (all years)
- Desmo RR
TYGA no: TYLY-0111
SKU: alg-10191 Categories: 848 / 1098 / 1198, ALL products, Desmosedici RR, Ducati, Monster, Shop, Tank fillers, Yamaha, YZF-1000 R1 2002- 6, YZF-1000 R1 2007- 8, YZF-1000 R1 2009- 14, YZF-600 R6 2006- 7, YZF-600 R6 2008- 12Exhaust set slip on, Motogp style stainless steel maggot , Honda MSX125 GROM
€307.40
Set, Pipe, Slip On, MSX125 Grom, Moto Maggot Silencer
Made in stainless steel with spring mounted aluminium silencer, this system significantly increases performance, saves weight and gives the best bang for the buck! (May not comply with noise regulations for some states and territories)
This system is supplied with a Moto Maggot EXSL-8013
Compatibility:
Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.
TYGA no: EXPS-0034
SKU: MSX-10004 Categories: ALL products, Exhausts, Exhausts, MSX125 2013 - 2015, MSX125 GROM, MSX125SF 2016 -2020, ShopStay pair cowl. RC30 style, Honda VFR400 NC30
€27.69
This is the all GRP seat cowling used in the NC30 RC211V style seat cowling kits, BPFS-0028 and BPFS-0034.
This product is suitable as a replacement seat cowling in the event of damage to the one in the set. It is also ideal for somebody wishing to custom fit it to another model. Please note it will need modifying to fit anything other than the NC30.
To be used with:
subframe TYLY-0025
battery box TYLY-0026
taillight BPLT-0013
registration/license plate holder BPCX-9007
TYGA no: BPSY-0237
SKU: hon-11427 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, Shop, VFR400RR NC30TYGA step kit replacement sidestand spacer, KTM RC390
€18.78
Tyga Step Kit Replacement Sidestand Spacer, KTM RC390
TYGA no: STAH-0047C
SKU: ktm-10075 Categories: ALL products, CNC parts, CNC parts, CNC parts, CNC parts, KTM, RC 125/200, RC 390, RC390 2022-Fork cap kit, Honda RVF750R RC45
€317.71
After 20 years or so of use, many RC45’s have damaged or scruffy fork caps. We know that it can really detract from an otherwise well restored bike if the fork caps are scuffed or dinged up. We therefore decided to reproduce the fork caps both for our collection and to offer to the public at the same time. CNC machined from 7075 T6 aluminium and brass and with the clear anodizing, just like the original OEM parts, these fork caps are the finishing touch of any R45 restoration and install exactly the same as the original Honda ones.
The 3 legged Spring Adjuster Plate is not included in this kit. Please reuse the original part.
Removal and refitting of the original RC45 rebound damper rod is required, so please follow the instructions carefully.