Bracket rear brake CNC black 84mm Brembo, Suzuki RGV250 VJ23
€110.40
Bracket, Rear Brake, 84mm Brembo Conversion, Black, RGV250 VJ22 and VJ23.
This is to fit the 84mm pitch rear caliper.
Also available in silver (TYLY-0090)
Applicable with the following Brembo model calipers:
Rear caliper P2
Code 20.6951.46
and
Rear CNC caliper P2
Code XA7.29B0
Used JDM Honda Headlights Refurbished (set)
€330.57
TYGA no: Used NC30 Headlights
SKU: hon-11532 Categories: ALL products, Electrical, Honda, RC36-2 -> RC30 replica products, Shop, Stocklist, various partsSet exhaust, race system double maggot , KTM RC390 2014 – ’21
€866.32
.Set, Pipe, Race System, RC390, Stainless Moto MaggotUpdate your bike with this great TYGA performance, KTM power part!!.Set, Pipe, Race System, RC390, Stainless Moto MaggotModel 2017This race system has been specifically developed for the KTM RC390 to maximise performance and looks. The dual underseat system eliminates any issues with ground clearance unlike some other systems on the market. In addition, in the event of an accident the exhaust is well protected. Other systems which have the exhaust exiting the right side of the swing arm will usually suffer terminal damage. This system increases performance, saves weight and enhances the looks of the bike. The system is not supplied with decibel killers, and may not meet noise regulations in your area.CompatiblityThis exhaust can be installed on a bike fitted with the cup race bodywork or standard, with passenger pegs installed or removed. It can be installed with stock registration/turn signal holder.For use with stanadard belly pan, we recommend the installation of the exhaust outlet cover BPFC-7431, and for use without passenger pegs, option carbon exhaust guards are available BPCC-0021L and BPCC-0021R.Please also see EXPS-0091 for similar system with oval silencersPlease refer to dynographA) All Standard.B) TYGA Serpent Pipe EXPS-0061, PC-V. Airbox/Engine all standard. Custom fuel/ignition mapC) TYGA Serpent Pipe EXPS-0061, PC-V. Airbox lid mod. No Filter. Custom fuel/ignition mapVery useful gains especially in the mid range for both B) and C), for much stronger acceleration.The silencer was full bore.NEW! for the 2017 model we added the EXPT-0003:Header exhaust, designed for unimpeded flow. Unlike the stock KTM header for the RC390, which has creases and dents to fit between the frame and engine, the TYGA header has been carefully fabricated to retain the round cross sectional area throughout, to avoid turbulent gas flow. Complete with Lambda sensor bung in the original position.Compatible with the following exhausts:Compatible with 2014-2016 KTM stock exhaust and other systems using the stock KTM header for those years.Compatible with 2014-2016 TYGA exhaust systems EXPS-0061 and EXPS-0062Included with 2017 on TYGA exhaust systems EXPS-0091 and EXPS-0092<iframe width= 560 height= 315 src= https://www.youtube.com/embed/tqJjURpXnaU frameborder= 0 allowfullscreen></iframe>
TYGA no: EXPS-0092
SKU: ktm-10092 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, KTM, RC 390, ShopAirbox side cover, Honda RS250 NX5
€278.67
Carbon airbox side cover.
Fits the TYGA air box, it’s not known if it will fit the HRC one.
TYGA no: sspecial010
SKU: special010 Categories: ALL products, CNC parts, Honda, RS250R NF5 / NX5, Shop, Various partsMeter assy, Honda MSX125 GROM
€209.52
Meter Assy.
TYGA no: 37100-K26-901
SKU: MSX-10010 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopKit, Bodywork, GRP, stock shape, with GRP tank, NSR250 MC28, Painted Rothmans
€2,968.09
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: BPFS-0185
SKU: hon-10969 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, NSR250, NSR250 MC28, Shop, SilencersCarbon rear hugger stock shape, Honda Monkey 125 2018-
€162.86
Rear Fender, Carbon, stock shape, Monkey 125 2018-
Carbon direct replacement for original part. Lighter and looks way, way cooler!
IMPORTANT, Rear fender BPCH-7042 is not compatible with the Honda number
plate holder (part number 80100-KOF-T00 ) due to the weight of the Honda
part. We recommend when installing BPCH-7042 that TYGA registration holder
BPCK-7142 is installed instead
TYGA no: BPCH-7042
SKU: msx-10427 Categories: ALL products, Bodywork and carbon, Honda, Monkey 125 2018-, ShopCarbon bodykit complete MiniRacerXtreme, Honda MSX125SF GROM
€2,408.13
Bodywork Set, (Carbon), MRX, MSX125SF Second Generation Grom
This kit is the ultimate modification for your MSX125SF Grom converting it to a mini racer for the road or track depending on how the mood takes you. The kit is comprehensive and is supplied with all mounting hardware and components including, headlight, handlebars, top triple clamp and mirrors.The panels are made from carbon fiber using high quality epoxy resins for strength and lightness and are finished in three layers of UV resistant clearcoat for a glossy finish. No need to paint; just assemble and ride away.. The shape lends itself to most liveries and ideal for promoting your business or race team.
With improved ergonomic and aerodynamic performance, this kit will increase top speed and agility as well as give a whole new riding experience for the MSX125SF Grom. Ideal for buddying road racers for honing racecraft and riding skills, or just a fun project to stand out from the crowd, the MRX will put a smile on everyone’s face.
This body kit MUST be used with a high level exhaust because there is no space for the belly type in the fairing lower. We recommend the following exhaust systems:
EXPS-0065
EXPS-0066
EXPS-0067
Comes with a free MRX Bike Dust Cover
Note this kit is specific to the MSX125SF second generation Grom. For the first generation kit, please order BPFS-0127 and BPFS-0128
TYGA no: BPFS-0156
SKU: MSX-10390 Categories: ALL products, Bodywork and carbon, Carbon, Honda, MRX, MSX125 GROM, MSX125SF 2016 -2020