Complete Bodykit set Type 11 Yellow, Honda MSX125 GROM
€329.98
Complete Bodywork Set, MSX125, Type 11, 2015 Marigold Yellow Scheme. Transform your bike! Easy and fun to install. With this product, you can afford to have a change of clothes for your beloved MSX125/Grom. Suitable for all models from 2013-2015
This set comprises of a complete set of all the OE Honda panels and decals shown in the photos below for the MSX125. Note it includes the decal ‘MSX125’ not ‘Grom’ as used in some markets. These are all genuine Honda products and not nasty Chinese knockoffs!
TYGA no: BPFS-7028Z
SKU: MSX-10311 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopGasket, Water Pump, MC28
€7.91
Gasket, Water Pump, MC28
TYGA no: 19226-KV3-680
SKU: hon-11091 Categories: ALL products, High performance, Honda, New OEM Honda parts, New OEM Honda parts, NSR250, NSR250 MC21, NSR250 MC28Section, Header, Left, Stainless, Ninja 250R
€79.66
Header, Reft. Used on EXPS-0014, EXPS-0015, EXPS-0016, EXPS-0017 and EXPS-0018.
TYGA no: EXPT-0012
SKU: kaw-10104 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 250R 2008- 12, ShopSilencer aluminium round 380mm (4 stroke) 2
€206.30
Silencer, Aluminium, Round, 2 x 380 mm., Assy.
This silencer has polished stainless steel endcaps and a tough anodized aluminium tube for a lightweight and attractive finish. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.
The ‘slip-on’ mount is designed to fit any system with a 2 external diameter tail pipe. It is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe. A silencer mounting clamp is also provided to secure the silencer to the bike.
Two extra (stainless) spring hooks are included and can then be welded to any other system that may need modification to fit the silencer.
Compatible with TYGA and other systems which use a 2 inch external diameter tail pipe, this silencer uses a 4 inch x 380 mm. outside aluminium tube.
TYGA no: EXSL-0040
SKU: alg-10138 Categories: 4 stroke exhaust sets, ALL products, exhaust system replacement parts, Exhaust systems, Exhausts, Exhausts, Exhausts, Honda, RVF400RR NC35, Shop, Silencers, VFR400RR NC30, VFR750F Gen 4, 94-97Set pipe, Full race with round stainless silencer, Kawasaki ZXR250/300 2013 –
€548.01
.Set, Pipe, Full Race System, Ninja 250R/300R, Round Stainless SilencerThis full race system has been specifically designed for the Ninja 250 to maximise power. Made in stainless steel with spring mounted carbon silencer this system significantly increases performance, saves weight and enhances the looks of the bike. Sounds great too! Unlike the stock system and most other aftermarket full systems, the TYGA Performance full race system is routed up the right side of the bike for the best possible gas flow and the performance figures support this. Please see below.(May not comply with noise regulations for some states and territories and may exceed noise regulations for some ciircuits)This system is supplied with a stainless round silencer.<iframe width= 560 height= 315 src= https://www.youtube.com/embed/aFjJq-crAQ8 frameborder= 0 allowfullscreen></iframe>
Please see the two dyno graphs from Kawasaki Racing Australia who independently tested the TYGA system against the stock system and also against a well known competitor. The figures clearly show the advantages of installing a TYGA full race exhaust whether it be for street or for race use.Graph 1 shows 8.5% more power over stock just from installing the TYGA Full systemGraph 2 shows the peaks are very similar but look how the TYGA system has more power everywhere else, up to 10% more power in the important 9,000 to 10,000 range. The Leo Vince exhaust was mapped for 98 octane and the Tyga for 91 which should give an advantage to the Leo.
TYGA no: EXPS-0047
SKU: kaw-10030 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 250R/300R 2013 -, Shopkit seat set race complete set, Ninja 400
€280.92
Kit, Seat Set, (Race GRP) Ninja 400
Complete Race Seat Set
Consist of Seat Cowling BPFT-7040(p) and Undertray BPFX-7040
See also complete Fairing Set BPFS-0175
TYGA no: BPFS-0176
SKU: kaw-10135 Categories: ALL products, Bodywork and carbon, Kawasaki, Ninja 400R 2018-Fairing set street, Suzuki RGV 250
€509.72
One of our most popular TYGA bodykits from last years.
Designed for the Suzuki RGV250, but used on many bikes all over the world.
This set of bodywork comprises the parts shown below which are also available separately.
* A clear screen is provided unless you specify tinted in the comment box at check out
This kit is supplied with all the additional fasteners needed to mount it to a stock VJ22.
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
TYGA no: BPFS-0040
SKU: suz-10012 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, RGV250 VJ22, Shop, SuzukiCarbon chain guard "stock", Honda NSR250 MC18
€114.99
Chain Guard, Carbon, Stock Shape MC18
Carbon chain guard for NSR250 MC18 (1988-1989). Made to the same dimensions as the original one, it is easy to install and will give your bike a fresh and sporty appearance.
TYGA no: BPCX-7036
SKU: hon-10650 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC18, Shop