Takegawa Big throttle body kit for GROM / MSX 4V+R 181cc
€321.38 €271.71
Takegawa Big throttle body kit for GROM / MSX 4V R 181cc
High performance with high quality and durability.
Specially designed for the 4 valve head Takegawa set.
TYGA no: 03-05-0125
SKU: msx-10375 Categories: ALL products, High performance, High performance, Honda, MSX125 2013 - 2015, MSX125 GROM, MSX125SF 2016 -2020Carbon holder brake hose "NSR500V style), NSR250 MC28 – NC30 – NC35
€45.78
Holder, Carbon, Brake Hose, NSR500V Style
This carbon brake holder is a faithful reproduction of HRC part 43150-NX6-000 used on the HRC NSR500V GP bike.
It allows for removal of the stock chain guard by providing a safe way of securing the rear brake line on any Pro Arm model such as the MC28, NC30 and NC35. To install this holder, it is necessary to drill and tap two small mounting holes in the swing arm to secure the holder using the bolts and washers provided with the holder. The holder is also supplied with cable ties and rubber hose suitable for braided brake lines in order to keep the brake line held in position while at the same time looking neat and tidy.
Important: care should be taken during installation to allow adequate clearance of the brake line with the chain and rear wheel when the bike is being ridden allowing for movement due to suspension etc.
TYGA no: BPCC-0051
SKU: hon-11203 Categories: ALL products, Bodywork and carbon, High performance, Honda, NSR250, NSR250 MC28, NSR500V NX6, RS250R NF5 / NX5, RVF400RR NC35, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30Front wheel spacer kit aluminium, Honda NSR250 MC21/M28/NC30
€34.40
Replace the heavy steel front wheel spacers and wheel bearing distance spacer with these lightweight 6061-T6 aluminium spacers. At 35% of the weight of standard they’re just what you need for easier wheelies!
TYGA no: TPER-0024Â
SKU: hon-10395 Categories: ALL products, CNC parts, CNC parts, CNC parts, Honda, NSR250 MC21, NSR250 MC28, Shop, Various parts, VFR400RR NC30Carbon dash panels (pair), Kawaskai ZX10R 2011-13
€244.86
High quality carbon products, perfect fitment and easy to install. Gives your bike that SBK look
Lightweight carbon fibre direct replacement for Kawasaki OEM item. Predrilled for use with stock mounting hardware.
(TYGA logo is applied after clearcoat and can be eaily removed)
Carb Service Kit, 12 pieces, Honda NSR250 MC28
€43.36
Carb Service Kit, 12 pieces, Honda NSR250 MC28
LiteTek Carburettor Seal Kit to suit: Honda NSR250 MC28
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
2x FB-032 Float Bowl Seal, Material: Flourosilicone (Part of Honda kit: 16010-KV3-950)
2x FB-033 Top Cap O-Ring, Material FKM (Part of Honda kit: 16010-KV3-950)
2x OR-009 Drain Screw O-Ring, Material: Viton 70A (Part of Honda kit: 16010-KV3-950)
2x OR-014 Fuel T-Pipe O-Ring, Material: Viton 70A (Part of Honda kit: 16010-KV3-950)
2x OR-012 Float Bowl Vent O-Ring, Material: Viton 70A (Part of Honda kit: 16010-KV3-950)
2x CS-005 Choke Plunger Cap Material: Viton 70A (Part of Honda kit: 16046-KV3-950)
TYGA no: CKA-Honda-MC28
SKU: alg-10367 Categories: ALL products, Carburettor Service Kits,, Honda, NSR250, NSR250 MC28, Various partsExhaustset race Stainless steel carbon Silencer round w cap, NC30 NC35
€1,251.76
TYGA stainless steel racing exhaust, the best set available in the market
Exhaustset race Stainless steel, carbon silencers oval w cap, NC30 NC35 (hon-10302)
The TYGA Full Race System has been designed with maximum power mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits both the NC30 and NC35. Most systems are not designed to be used with a side stand on the NC30, but the TYGA system can be used with a side stand on both the NC30 and NC35.
For unsurpassed looks, sound and performance, this system can be used with any of our 400 system exhaust silencers.
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing only half the weight of the stock system makes for a weight saving of4.2 kg.
NC35:
First, an NC35 was tested with the original Honda exhaust system and produced a peak of 53.5hp; about the right number for a stock bike.
Then the pipe was changed for the TYGA full stainless system, and the main jets increased one size from stock front and rear. No other changes were made, and the peak hp increased to 59.9hp, a gain of 6.4hp (Over 8% more power!)
NC30:
On the NC30, the advantage over the stock exhaust system is higher. With just the TYGA pipe and a couple of main jet changes, the power leaps from a stock 52hp up to a healthy 59hp. That’s 7hp, or 13.5% more.
The pipe set can be used with any silencer with a2 inchinternal diameter bore which is held in place by springs for ease of fitment and removal. TYGA provide the following compatible silencers which can either be ordered separately with this system or together as a set.
The pipe set is supplied with a round carbon silencer EXSL-0112 which is held in place by springs for ease of fitment and removal. This system may not comply to specific country noise emission regulations and is not homologated for street use.
TYGA no: EXPS-0026
SKU: hon-10303 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, Exhausts, Honda, RVF400RR NC35, Shop, VFR400RR NC30NGK plugcab for sparkplug R7282 Blue
€67.95
NGK sparkplug cab for sparkplug R7282 Blue (alg-10228)
NGK spark plug cap TRS1225 with 5 kohm resistor for NGK short race spark plug R7282. Suitable for 8 mm spark plug cable. Can be used f.e. for Honda NSR250 / RS and Aprilia RS250 / Suzuku RGV250 Yamaha TZ 125 and 250 road race engines.
You also need product alg-10227, picture below is a complete set.
TYGA no: TRS1225
SKU: alg-10228 Categories: ALL products, Aprilia, High performance, High performance, High performance, High performance, High performance, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, RS250, ShopFly screen H2C black, Honda MSX125 2021
€55.41
Carbon front fender “sport style”, Honda MSX 125 (MK1 MK2) Monkey 125 2018-
Sports style Carbon front fender to give your Monkey 125 or MSX125 Grom* a clean and unique appearance. Easy install with mounting bolts provided.
See also BPFF-7142 for GRP version.
*Note that when this fender is installed on the MSX125 Grom, it uses using just the four bolts in front of the fender and the two mounting holes behind the fork leg for the stock fender on the Grom are not used. For the Monkey, it mounts on the fork guard mounting holes.
TYGA no: APK26PL64100ZA
SKU: msx-10473 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2021-, Shop