Silencer carbon/carbon end cap, round, 2" x 380mm
€426.38
Silencer carbon/carbon end cap, round, 2" x 380mm
This silencer has a carbon endcap and a carbon tube to produce a modern, attractive and lightweight product. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.
The ‘slip-on’ mount is designed to fit any system with a 2" external diameter tail pipe. It is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe. A silencer mounting clamp is also provided to secure the silencer to the bike.
Two extra (stainless) spring hooks are included and can then be welded to any other system that may need modification to fit the silencer.
* Please note that a decibel killer cannot be used with our carbon sleeved silencers.
TYGA no: EXSL-0081
SKU: hon-11012 Categories: ALL products, exhaust system replacement parts, Exhaust systems, Exhausts, Honda, Shop, VFR750F Gen 4, 94-97Seat pad large , flat
€46.69
Vinyl covered medium density foam race seat pad provides a maximum amount of feedback from the bike and minimum comfort!
Underside of seat has velcro stitched in. Kit is supplied with a strip of Velcro with strong 3M adhesive tape appied on the underside. Easy installment. Cut the strip to size using scissors, one each side recommended. Then simply peel back the protective layer on the adhesive strip, lay the strips on the seat cowling and place the seat pad in position.
Compatible Parts:
Tyga Tail cowling: BPFT-9030 BPFS-0102 and BPFS-0103
Meterstay T8,CBR250RR MC22
€63.75
This stay is a replacement for the stock one when fitting our T8 bodywork. It is not an exact fit if used with stock fairing because front hole position is changed.
Carbon Frame Cover, Right, NC35
€180.64
Frame Cover, Right, (Carbon) NC35
This lightweight carbon cover fit over the frame and it is designed to protect against scratches and damage to the frame in the event of an accident
TYGA no: BPCC-7418R
SKU: hon-10745 Categories: ALL products, Bodykit replacement parts, Bodywork and carbon, Carbon, Honda, RVF400RR NC35Seal, Gear Change Shaft, MC28
€8.00
Seal, Gear Change Shaft, MC28
TYGA no: 91202-444-023
SKU: hon-11115 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28Aprilia RS250 Screen MKII(98-06)
€49.05
Aprilia RS250 Screen
This screen fits the original bodywork.
TYGA no: screenrs2
SKU: apr-10061 - apr-10062 Categories: ALL products, Aprilia, Bodykit replacement parts, Bodywork, Bodywork and carbon, RS250Seat Panel, Left, Green, Ninja 250R 2008 -12
€55.10
Seat Panel, Left, Green, Ninja 250R 2008 -12
TYGA no: 36040-0114-777
SKU: kaw-10202 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R 2008- 12, ShopHandle bar clamp pair ” hinge type” black, KTM RC390 2014 -25
€205.78
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: TYLY-1731
SKU: ktm-10214 Categories: ALL products, CNC parts, CNC parts, CNC parts, Exhausts, KTM, RC 125/200, RC 390, RC390 2022-, Stock list, all models