Exhaust Chamber, Right, Stainless Steel, MC21
€317.17
This is the bare right side replacement chamber in stainless steel for EXCS-0005A suitable for EXCS-005A and EXCS-006A for the MC21
Carbon silencer guard (street) WSS300 race system, KTM RC390
€127.88
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: BPCC-0048
SKU: ktm-10153 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all modelsSilencer clamp double 60mm
€33.18
This GP silencer clamp is specifically designed for:
Honda TYGA NSR250 GP Style exhaust systems
Aprilia TYGA Aprilia RS-250 GP style exhaust systems
Please make comment in comment box at check out what model the clamp is going to be fitted to and we will provide suitable mounting hardware.
Note that for Aprilia’s using our TYGA GP Seat cowling, the EXCL-0012 is recommended because it has a mounting hole at the top instead of between the silencers which matches the mounting position for the exhaust stay provided with the seat cowling kit. For all other Aprilia RS-250s with stock bodywork order EXCL-0011
Designed to securely clamp 60~61mm O.D. silencers. Fabricated in 304 Stainless Steel with Molded rubber for secure, yet safe clamping.
Compatible with the following TYGA systems:
EXCS-0006, EXCS-0008, EXCL-0018
Please note that the correct clamp is provided when you purchase any complete expansion chamber system with silencers. You do not need to order separately. However, as mentioned above, request a EXCL-0012 if you are ordering an Aprilia GP system and a TYGA GP seat cowling and the EXCL-0012 will be substituted for the EXCL-0011.
TYGA no: EXCL-0011
SKU: alg-10155 Categories: 2 stroke exhaust sets, ALL products, Aprilia, Exhausts, Exhausts, Exhausts, RGV250 VJ22, RS250, Shop, SuzukiExhaustset race Stainless steel, aluminium silencer, Honda CBR250R
€411.44
The TYGA Full Race System has been designed with maximum power mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. For unsurpassed looks, sound and performance, this system is supplied with silencer EXSL-0040. If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing only 3 kg instead of the 8 kg of the stock system
TYGA no: EXPS-0030
SKU: hon-10304 Categories: 4 stroke exhaust sets, ALL products, CBR250R 2011 - 15, Exhausts, Exhausts, Honda, ShopCarbon chain guard, KTM RC125/RC200/RC390 2022-
€141.35
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: BPCX-7131B
SKU: ktm-10207 Categories: ALL products, Bodywork and carbon, Exhausts, KTM, RC390 2022-, Stock list, all modelsVHM Cyl. Headset Honda CR250 ’02-’04
€347.95 €303.33
VHM Cyl. Headset Honda CR250 ’02-’04 (alg-10212) AA33042VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.We are pleased that we can offer VHM products on our website.VHM produces exchangeable cylinder heads for two-stroke engines in motocross and road racing. With the experience gained in two-stroke tuning, VHM develops products of high quality.During intensive tests, on the racetrack as on the VHM dyno, the cylinder head showed a better temperature development in the cylinder head. A lower engine temperature followed. The explanation of this phenomenon is the use of a special aluminum alloy which has a very good heat transference. Another advantage of the material is its resistance to detonation.The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring designThis head set comes with following parts:1x cylinder head1x standard insert (20.60cc)Optional inserts:– blind– 19.80– 20.20– 20.60– 21.00This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.Note: please put in comment box, the year of your bike and what size insert you want (no comment is STD insert).Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
TYGA no: AA33042Â Â Â Â Â Â Â Â
SKU: alg-10212 Categories: ALL products, Honda, Honda MX, Motocross, Shop, VHM productsTop Triple clamp CNC black , Suzuki RGV 250
€218.46
CNC machined TYGA top triple clamp ( without detachable key holder for race use) for your RGV250 VJ22.
Designed and machined in house by TYGA, as a direct replacement for the OEM top triple clamp. FEA tested and developed for increased strength without unnecessarily increased weight.
Crafted from aircraft spec 6061-T6 alloy, the top triple clamp is ready to fit.
The detachable ignition switch holder can be ordered separately or together with this product as set TYLY-1046.
TYGA no: TYLY-1046(p)
SKU: suz-10056 Categories: ALL products, CNC parts, CNC parts, RGV250 VJ22, Shop, Suzuki