Top Triple clamp CNC black, Aprilia RS250 kit
€288.43
CNC machined top triple clamp with detachable ignition switch/lock holder for your Aprilia RS250.
Designed and manufactured in house as a direct replacement for the standard top triple clamp.
Fully functional steering lock.
Crafted from aircraft spec 6061-T6 aluminium, using high technology 3D machining, the TYGA clamp and key holder set offer high strength while being lighter than the standard component, and looks fantastic!
Only fits the MK2 RS250
TYGA no: TYLY-1053
SKU: apr-10016 Categories: ALL products, Aprilia, CNC parts, CNC parts, RS250, ShopHarness Extension, SC28 (94-95) Meter, Honda VFR750R RC36-2
€28.51
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: TYWH-0008
SKU: hon-11478 Categories: ALL products, Electrical, Honda, RC36-2 -> RC30 replica products, Shop, StocklistSubframe aluminium , Honda VFR400 NC30
€453.76 €408.41
This lightweight aluminium subframe is closely modelled on the stock NC30 subframe and can be substituted for the heavy steel one with a considerable weight saving . Made from extruded and CNC machined 6000 series aluminium, this product is hand-welded by our craftsmen to provide a strong, accurate and beautiful component. Finished in Hard wearing satin black powdercoating, it can be painted if the customer so chooses.
Note this subframe is for race and single seat use only and cannot be used for carrying a passenger. All mounting positions for exhaust stay, seat cowling, undertray, rear shock reservoir (BPCC-0046 is a direct fit), radiator overflow bottle, electrical components etc which are normally mounted to the subframe are supplied with subframe so it is almost a simple plug and play. Most of the standard fasteners are used, however where necessary, replacements are included.
If you wish to run this subframe without the rear fender, then this is also possible and we recommend installing it along with Seat cowling bracket part number: TYLY-0224-17 and battery box TYLY-0026. In this configuration, you will need modify the rear mounts of the battery box and drill them to attach to the subframe and to cable tie the ECU, starter relay etc which are normally attached directly to the undertray.
TYGA no: TYLY-0224
SKU: hon-10984 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, Shop, Various parts, VFR400RR NC30Handlebar Clamp, Right, Silver, 50 mm.
€98.58
Replacement Right handlebar clamp for handlebar set TYLY-0078
Tyga Step Kit Replacement Rear Brake Lever, Black, MSX125 Grom
€64.46
Tyga Step Kit Replacement Rear Brake Lever, Black, MSX125 Grom. Complete with bearings.
Front Fender yellow, Honda MSX125 GROM
€88.02
Front Fender, Marigold Yellow, MSX125 Grom
TYGA no: 61100-K26-900ZF
SKU: MSX-10323 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopRegistration/License Plate Holder, (GRP), T13 Assy.
€43.40
This product is made using GRP and holds the registration/license plate for use with our T13 seat cowlings. It is supplied with a registration/license plate illumination light for countries where this is a legal requirement. We also make the same product but using carbon fiber, see BPCX-9118
This product attches by means of two bolts on an angled back flat plate and could be adpted to be used with other models with a flat undersurface.
TYGA no: BPFX-9118
SKU: hon-10822 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Honda, RVF400RR NC35Triple clamp set CNC black RVF to fit NSR, NSR250 MC21
€698.63
Triple Clamp Set, CNC Black, NC35 Forks to fit MC21
CNC machined TYGA triple clamp set for the MC21 to take NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
Front forks are not included and are shown in photos for reference only.
TYGA no: TYLY-1541
SKU: hon-10296 Categories: ALL products, CNC parts, CNC parts, Honda, NSR250 MC21, Shop