Set, Pipe, R.H Exit, Full Race System, Round Aluminium Silencer/ Carbon End Cap ,VFR750F, 3rd Gen,
€1,271.03
Set, pipe full race system round carbon/carbon end cap silencer RH exit, VFR750F gen 4, 94-97
This TYGA Full Race System has been designed with no compromises and maximum power in mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits the 1994-1997 Generation 4 VFR750.
For unsurpassed looks, sound and performance, this system comes with the 450mm Round Auluminium Silencer but can be used with a number of our 2″ slip on exhaust silencers
See also our other sets with silencer included:
EXPS-0132 Set, Pipe, R.H Exit, Full Race System, Round Aluminium Silencer
EXPS-0133 Set, Pipe, R.H Exit, Full Race System, Round Carbon/Carbon End Cap Silencer
EXPS-0135 Set, Pipe, R.H Exit, Full Race System, Round Carbon Silencer
EXPS-0136 Set, Pipe, R.H Exit, Full Race System, Oval Stainless Silencer
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing in at only 4.15 kgs (not including the silencer).
**Important Note**
The TYGA system keeps the use of the side stand and pillion foot rests however, the centre stand must be removed prior to installation.
TYGA no: EXPS-0153
SKU: hon-11327 Categories: ALL products, Exhausts, Honda, Shop, VFR750F Gen 3 90-93Front Fender, Green, Ninja 250R/300R 2013 -18
€80.21
Front Fender, Green, Ninja 250R/300R 2013 -18
TYGA no: 35004-0318-777
SKU: kaw-10182 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R/300R 2013 -, ShopTemp gauge race, universal
€17.20
Temp Gauge, Race, Universal
Stand alone temperature gauge for race use. Ideal for monitoring engine coolant temperature.
No adapter has been fitted, so this must be configured to your own application using the fittings of your choice.
Displays temperature in Centigrade, up to 99.9C
Race use only. No back light function.
Supplied with 2x LR44 batteries (not fitted).
TYGA no: TELC-0005
SKU: alg-10325 Categories: 848 / 1098 / 1198, ALL products, Aprilia, By model, Cagiva, Desmosedici RR, Ducati, GSX-R1000 K5-K6, GSX-R1000 K7-K8, GSX-R1000 K9-K10, GSX-R1300 Hayabusa, GSX-R1400 Hayabusa, GSX-R600/750 K6-K7, GSX-R600/750 K8-K10, Honda, KTM, Mito 125, Monster, RC 125/200, RC 390, RD350LC 4L0, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS125, RS250, RS250R NF5 / NX5, RSV125, Shop, Suzuki, Suzuki RGV250, Universal parts, V-Max 1985 - 2007, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, VTR1000Sp1SP2, Yamaha, YZF-1000 R1 2002- 6, YZF-1000 R1 2007- 8, YZF-1000 R1 2009- 14, YZF-600 R6 2006- 7, YZF-600 R6 2008- 12, YZF-R125 2009-, YZF-R25/R3Stay, Silencer, Yamaha R25/R3
€75.05
Stay, Silencer, Yamaha YZF-R25 and YZF-R3
Used on EXPS-0072, EXPS-0073 and EXPS-0074.
Two different length mounting bolts are provided to allow the stay to be fitted alone, or to be fitted with the passenger footrest over the top.
Lower cowling GP-T, Honda VFR400 NC30
€216.35
Lower Cowling (GRP), NC30 GP-T, Assy.
This product is designed to be used with BPFU-9034 as part of the Bodywork set BPFS-0144
.
Designed in-house by TYGA Performance and using 15 years experience of developing fairings for the NC30, this fairing is lightest and most stylish yet. The design incorporates mounting points for the radiator mesh and other features include a vent underneath and high quality lamination by our skilled craftsmen. Weight is about 1 kg but strength retained using high strength epoxy resins and good design. See also carbon version BPCL-9034.
Compatible products:
This product must be used with BPFU-9034
This lower cowling is designed to be used with stock or race exhaust systems though some spacing may be necessary to get clearance with race exhausts:
1. stock systems, fit with no spacing but care should be taken when installing to avoid any touching or proximity to exhaust and subsequent burning of the fairing.
2. Tyga exhaust can be installed with no modification
3. Other systems, we can not advise, but should require only spacing or possibly cutting area around where pipe exits near sidestand.
TYGA no: BPFL-9034
SKU: hon-10599 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, VFR400RR NC30Triple clamp set CNC silver, Honda NSR150
€142.52
CNC machined TYGA top triple clamp for race use ( not including detachable key holder) for your NSR150SP.
Designed and machined in house by TYGA, as a direct replacement for the OEM top triple clamp. FEA tested and developed for increased strength without unnecessarily increased weight.
Crafted from aircraft spec 6061-T6 alloy, the top triple clamp is ready to fit.
The detachable ignition switch/lock holder which is positioned to allow use of the steering lock can be bought separately or order as triple clamp set TYLY-0051.
Powervalve cover Red, Suzuki RG125
€60.74
set ( 4 pieces), complete CNC billet aluminium powervalves, RGV250/RS250 (alg-10123)
This set of Power valves is the latest version, and can be used for your Suzuki RGV250 or Aprilia RS250. Fully tested on Dyno and used on track and street bikes.
The set is made of CNC billet aluminium and is special coated.
No more problems with the “power valve pin” and having to buy new ones every 15.000 km.
And the risk that a broken power valve will ruin your engine!!
Now available for an unbeatable price, and FREE SHIPPING all over Europe.
TYGA no: TYLY-4039
SKU: alg-10436 Categories: ALL products, High performance, RG125, Shop, Suzuki Tags: and can be used for your Suzuki RGV250 or Aprilia RS250. Fully tested on Dyno and used on track and street bikes., And the risk that a broken power valve will ruin your engine!!, Best available in the market., No more problems with the “power valve pin” and having to buy new ones every 15.000 km., The set is made of CNC billet aluminium and is special coated., This set of Power valves is the latest versionTop triple clamp set CNC black, Honda VTR1000 SP1
€327.34
CNC machined top triple clamp with detachable ignition switch/lock holder for your Honda SP1. Designed and manufactured in house as a direct replacement for the standard top triple clamp. Fully functional steering lock.
Crafted from aircraft spec 6061-T6 aluminium, using high technology 3D machining, the TYGA clamp and key holder set offer high strength while being lighter than the standard component, and offers an improved and individual look to your bike.