Endurance painted Kit complete bodywork stock RR, “single” Honda RVF400 NC35
€1,878.73
Seat Cowling, (GRP), NC30/NC35 GP-T
This product is the latest TYGA design for the 400 V4 and is designed to be stylish and lightweight. This product includes ONLY the seat cowling for replacement in the event of an accident or can be used for a project bike of another model. For the MC21, we recommend ordering one of the complete kits below (BPFS-****) which includes all the necessay parts to complete the modification. For installation of any other model the customer will need to make the necessary modifications,
BPFS-0148 (GRP, NC30)
BPFS-0149 (GRP, NC35)
BPFS-0150 (Carbon, NC30)
BPFS-0151 (Carbon, NC35)
The advantages of this seat cowling over stock include:
– use with rest of seat cowling kit, much lighter than stock
– new design allows for integrated LED Tail light ( BPLT-0008) for flush fitment and new lighter registration/license plate holder ( BPFX-9133).
– higher at the rear, to give the bike a more agressive stance
– better rider control by use of enclosed seat area
– improved strength with precision in design and fitment
Tyga Performance Compatible Parts for this Product:
This product is compatible with:
BPFX-9034 and BPCX-9134 Undertray, NC30/NC35 GP-T
TYLY-0133 Subframe, NC30/NC35 GP-T
TYLY-0130 Batterybox NC30/35 GP-T
BPFX-9234 Seat Support, NC30/NC35 GP-T
BPSP-0006 Seat Pad, GP-T
BPAC-0001 Rear Brake Reservoir Kit,
BPLT-0009 LED Taillight
BPFX-9133 Registration Plate Holder GP-T
TYGA no: BPFS-0213
SKU: hon-11395 Categories: ALL products, Bodywork, Bodywork and carbon, RVF400RR NC35Seat cowling GRP, Honda NSR250 MC21
€348.13
Seat Cowling, (GRP), MC21 GP-T
We now make four versions of our NSR250 GP Race seat cowling for use for the MC21 in 8 different race and street sets. This product includes ONLY the seat cowling for replacement in the event of an accident or can be used for a project bike of another model. For the MC21, we recommend ordering one of the complete kits below (BPFS-****) which includes all the necessay parts to complete the modification. For installation of any other model the customer will need to make the necessary modifications,
BPFS-0129 (GRP,Street)
BPFS-0130 (GRP Race)
BPFS-0131 (Carbon,Street)
BPFS-0132 (Carbon, Race)
The advantages of this seat cowling over stock include:
– use with rest of seat cowling kit, much lighter than stock
– new design allows for integrated LED Tail light ( BPLT-0008) for flush fitment and new lighter registration/license plate holder ( BPFX-9133). For race use, location for LED Tail light acts as air vent
– higher at the rear, to give the bike a more agressive stance
– better rider control by use of enclosed seat area
– improved strength with precision in design and fitment
Tyga Performance Compatible Parts for this Product:
This product is compatible with:
BPFX-9033, BPFX-9333, BPCX-9033 and BPCX-9333 Undertray, NSR250 GP-T
TYLY-0108 Subframe, NSR250 GP-T
BPFX-9233 Seat Support, NSR250 GP-T
BPSP-0006 Seat Pad, GP-T
BPAC-0001 Rear Brake Reservoir Kit,
BPLT-0009 LED Taillight
BPFX-9133 Registration Plate Holder GP-T
TYGA no: BPFT-9033
SKU: hon-10463 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, NSR250 MC21, ShopSeat cowling (grp) Singel stock shape race, Honda RVF750 RC45
€242.59
Seat Cowling, GRP, RC45, Single, Stock Shape, Race
Stock shape seat cowling, race with no taillight holes. Single seat, direct replacement for stock RC45 seat cowling in the same shape.
Please note, to order this product with taillight holes, please order BPFT-7041.
Retains use of Honda OEM seat pad
Seal Mechanical, Waterpump, MC21/28
€70.05
Seal Mechanical, Waterpump, MC21/28
TYGA no: 19217-KV3-831
SKU: hon-11090 Categories: ALL products, High performance, Honda, New OEM Honda parts, New OEM Honda parts, NSR250, NSR250 MC21, NSR250 MC28Chain slider, RS250 NX5
€44.99
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007
Silencer carbon round (4 stroke) 2
€348.60
This silencer has polished stainless steel endcaps and a carbon fiber tube to produce an attractive and lightweight product. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.
The ‘slip-on’ mount is 2 internal diameter, so is compatible with our existing TYGA NC30/35 pipe and any other system with a 2 external diameter tail pipe. It is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe.
Two extra (stainless) spring hooks are included and can then be welded to any other system that may need modification to fit the silencer.
For use with pipe set EXPS-0012 or any system using a spring mounted 2 inlet.
TYGA no: EXSL-0012
SKU: alg-10029 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, Exhausts, RVF400RR NC35, Shop, Silencers, VFR400RR NC30Racing step kit CNC silver, Honda VTR1000 SP2
€322.70
Designed in-house by TYGA Performance using the latest in CAD/CAM software, these CNC machine-made step kits are made from top quality aircraft grade aluminium. Complete with carbon heelguards on the left hanger.
Fittings are also provided to mount the standard brake light switch, however, many people replace this with an inline pressure switch for better appearance.
Please note that this step kit will not fit the VTR1000 SP1 due to the different type link rod.
This step kit moves the peg position back 12 mm. and up 20 mm. from standard . Pitch of hanger frame mounting holes is 83 mm.
Crankcase covers CNC, Honda MSX125 GROM
€317.88
moet nog 501
TYGA no: APK2611370TA
SKU: MSX-10196 Categories: ALL products, Honda, MSX125 2013 - 2015, Shop, Various parts