Boyesen Dual reeds, Cagiva Mito125
€48.76 €46.52
Boyesen Dual reeds, Cagiva Mito125
Boyesen Power Reeds use a patented dual-stage fiberglass design for more airflow, more air velocity and more overall power.
Boyesen dual-stage power reeds produce a better throttle response right off idle and through the mid-range when compared to the traditional Power Reed setup.
1 engine = 1 set
Belly pan (GRP) unpainted, Honda MSX125 GROM
€149.20
Belly Pan, (GRP), MSX125, unpainted. Enclosed bottom makes this product suitable for race regulations requiring fluid retention capability.
High quality mounting hardware provided and easy to install.
We also offer the same product with painted and with carbon, see BPFL-7128 W/R/Y/B and BPCL-7228 shown in the photos
Important. This product needs painting and is only provided with a PU primer finish
Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.
<p><a href="{{media url="wysiwyg/01-belly-pan-fitting-bpfl-bpcl-7128-online-hl-d42c3f6e.pdf"}}" target="_self">Click here for PDF</a></p>
TYGA no: Â BPFL-7128
SKU: MSX-10188 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopCarbon carburettor tray, Honda VFR400/RVF400
€180.64
The carburetors on the NC30/35 are particularly prone to heat from the engine, which in turn heats up the fuel and lowers efficiency.
The TYGA carb tray for the NC30/35 aids in keeping the heat of the engine away from the carbs, and is fully compatible with all standard components. It will also help with keeping debris away from the carbs, if the carbs are being run full open.
No special tools are required to fit the carb tray.
TYGA no: BPCX-9309
SKU: hon-10360 Categories: ALL products, High performance, High performance, High performance, Honda, RVF400RR NC35, Shop, VFR400RR NC30Exhaust stay, Honda CBR250/CBR500
€50.22
This exhaust stay is designed to replace the rear foot peg hanger assembly and is a direct fit. Simply remove the stock hanger and replace with this lightweight elegant hanger and go racing! Fits the CBR250R, CBR300R and the CBR500 models.
TYGA no: TYLY-0074
SKU: hon-10310 Categories: 4 stroke exhaust sets, ALL products, CBR250R 2011 - 15, CBR300R 2014-, CBR500R, Exhausts, Exhausts, Exhausts, Honda, ShopCarbon chain guard rear, Suzuki RGV250 VJ23
€70.24
Chain Guard, Rear, Carbon, RGV250 VJ23
Fits: Suzuki RGV250 VJ23
Carbon splash guard, MSX125 2021-
€249.57
Carbon front fender “sport style”, Honda MSX 125 (MK1 MK2) Monkey 125 2018-
Sports style Carbon front fender to give your Monkey 125 or MSX125 Grom* a clean and unique appearance. Easy install with mounting bolts provided.
See also BPFF-7142 for GRP version.
*Note that when this fender is installed on the MSX125 Grom, it uses using just the four bolts in front of the fender and the two mounting holes behind the fork leg for the stock fender on the Grom are not used. For the Monkey, it mounts on the fork guard mounting holes.
TYGA no: BPCH-7428
SKU: msx-10509 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2021-, ShopExhaust Chamber, Left, GP Type, Stainless Steel, RGV250, VJ22
€305.44
Bare replacement left side chamber for chamber set EXCS-0010L
VHM Cyl. Headset KTM 125SX ’16-
€271.95 €255.63
VHM Cyl. Headset KTM 125SX ’16-> (alg-10220) AA33156VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.We are pleased that we can offer VHM products on our website.The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring designThis head set comes with following parts:1x cylinder head1x standard insert (11.60cc)Optional inserts:– blind– 11.20– 11.40– 11.80This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.Note: please put in comment box, the year of your bike and what size insert you want (no comment is STD insert).Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
TYGA no: AA33156
SKU: alg-10220 Categories: ALL products, KTM, KTM MX, Motocross, Shop, VHM products