Screen, RC36-2, RC30 Style
€52.00
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: SCRE-0182
SKU: hon-11517 Categories: ALL products, Bodywork, Honda, RC36-2 -> RC30 replica products, Shop, StocklistTYGA flywheel/RC valve remover, Honda NSR125/150/250/300
€135.99
This new, TYGA designed 2 in 1 combination tool is a flywheel puller and RC valve removing tool all in one handy package.
Saves space in your toolbox, and less clutter on the work bench.
How to use:
Familiarise yourself with the parts (see picture).
The tool is delivered ready for use as a flywheel puller. Just screw part D into the crank, then wind the (left hand) threaded main body (part A ) into the flywheel centre and pop the flywheel off by rotating part B clockwise. Part C is not used.
For removing the RC valve shaft remove part B completely and refit from the opposite end, screwing all the way home. Then slide in the part C . Position the tool over the valve shaft and wind part C onto the RC valve shaft (left hand thread). When fully home just rotate part B anti-clockwise to pull out the shaft. The RC valve shaft seal and E-clip will probably be damaged in the process, and should be replaced. Part D is not used.
22mm and 19mm spanners (not supplied) are required for correct operation.
*Note* This tool can be used on the NSR150 to remove the RC valve shaft, but will not fit the flywheel. Please use TYTO-0007 for this job.
TYGA no: TYTO-0014
SKU: hon-10329 Categories: ALL products, Honda, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, Shop, Tools, Various parts, Various parts, Various parts, Various partsHandlebar set black, Honda CBR250 2011 – CBR300 2014
€222.93
Handlebar Set, Black, CBR250R/CBR300R.
This CNC machined handlebar set is designed to change the handlebars to be up to 25 mm. lower from the stock position giving a more sporting riding position. The ergonomics work very well with our step kit STAA-0013 putting more weight over the front end for better control, while putting the rider’s upper body lower behind the fairing for better areodynamics and less fatigue at high speed riding.
Designed to match our triple clamp (TYLY-0069 and TYLY-1069), these handlebars give the finishing touch to the cockpit area and are available in two colours, black or silver.
TYGA no: TYLY-1469
SKU: hon-10184 Categories: ALL products, CBR250R 2011 - 15, CBR300R 2014-, CNC parts, CNC parts, CNC parts, Honda, ShopSilencer GP-T, Aluminium 60mm, Two Stroke, Spring Mounted
€95.39
Silencer GP-T, Aluminium, Two Stroke, Spring Mounted, Assy
To complement our NX5 exhaust chambers, we wanted a silencer design which was both functional and classic. The result is this TYGA Performance GP-T style silencer. Available in three models, with carbon, carbon/Kevlar and aluminium outer tubes and with stainless end caps, it is mounted by two springs (included) for ease of installation and for looks. The silencer is strong and easily rebuildable, using rivets to assemble. Remember to order two silencers for every twin cylinder exhaust system! Also see EXSL-0069 and EXSL-0069.
Note, this silencer is only compatible with the NX5 RS250R exhaust system and cannot be mounted on other exhaust chambers in our product range.
TYGA no: EXSL-0070
SKU: hon-10903 Categories: ALL products, CNC parts, Exhaust, Honda, RS250R NF5 / NX5, ShopCarbon Front fender, Yamaha R1 2002-8
€180.80
Lightweight carbon fibre direct replacement for Yamaha OEM item. Predrilled for use with stock mounting hardware.
(TYGA logo is applied after clearcoat and can be eaily removed)
TYGA no: BPCF-7002
SKU: yam-10007 Categories: ALL products, Carbon, Shop, Yamaha, YZF-1000 R1 2002- 6, YZF-1000 R1 2007- 8Carbon frame covers (pair), Honda CBR1000 2008-’15
€495.59 €305.74
Frame Cover, Pair, (Carbon) 2008-15 CBR1000RR
These lightweight carbon covers fit over the frame and it is designed to protect against scratches and damage to the frame in the event of an accident. It has a layer of carbon/Kevlar inside for abrasion resistance.
TYGA no: BPCC-7001
SKU: hon-10527 Categories: ALL products, Carbon, CBR1000 2008-11, CBR1000 2012-, Honda, ShopScreen clear stock shape, Honda VFR750 RC30
€52.00
Upper cowling “stock”, Honda VFR750 RC30 (hon-10569)
Direct replacement for OEM Honda lower cowling with headlight and indicator holes filled in. Due to being constructed with strong flexible epoxy resin, it is thinner and therefore about 65% the weight of the stock upper cowling. In every other way, the same as stock. Can be used with TYGA Performance or factory Honda RC30 lower cowlings.
Undertray (GRP), NC35 RC211V Assy.
€70.35
This is the all GRP undertray used in the NC35 RC211V style seat cowling kit BPFS-0018.
This product is suitable as a replacement in the event of damage to the one in the set. It is also ideal for somebody wishing to custom fit it to another model. Please note it will need modifying to fit anything other than the NC35.
To be used with
seat cowling BPFT-9018
subframe TYLY-0025
battery box TYLY-0026
taillight BPLT-0013
registration/license plate holder BPCX-9007
TYGA no: BPFT-9020
SKU: hon-10766 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Honda, RVF400RR NC35