Racing stepkit adjustable (street), KTM RC390 2022-
€423.04
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: STAA-0037
SKU: ktm-10199 Categories: ALL products, CNC parts, Exhausts, KTM, RC390 2022-, Stock list, all modelsSet exhaust, half race with silencer, Kawasaki ER6
€392.82
The TYGA ER6 Race System has been designed with maximum power mind. No compromises have been made in the design and production of this exhaust. Manufactured from hand welded TIG welded stainless steel sections throughout, with the infamous Maggot ‘silencer’ secured by springs, for that ‘factory’ look and feel. The system fits both the ER6-N and the ER6-F. System is supplied with a lug for oxygen sensor.
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing only 1.5 kg, (compared to over 6 kg for stock) you are shaving valuable kgs off your bike.
The pipe set is supplied with Maggot silencer EXSL-2013 which is held in place by springs for ease of fitment and removal. This system WILL not comply to specific country noise emission regulations and is not homologated for street use. We strongly recommend the wearing of ear plugs when riding a motorcycle with this system installed. You have been warned!!
TYGA no: EXPS-0023
SKU: kaw-10012 Categories: 4 stroke exhaust sets, ALL products, ER6N-F 2009-11, Exhausts, Kawasaki, ShopTop triple clamp CNC black , Honda RVF400 -> CBR600 fork
€263.52
Top Triple Clamp, CNC silver, CBR600RR forks NC35/MC21/MC28 Conversion
CNC designed and manufactured in house as a direct replacement for the standard top triple clamp. Facilitates mounting holes for securing the ignition switch holder assy TYLY-0041 for use on NSR conversion or TYLY-0042 for NC35 conversion.
Crafted from aircraft spec 6061-T6 aluminium, using high technology 3D machining, the TYGA clamp offer high strength while being lighter than the standard component, and offers an improved and individual look to your bike.
Section final stainless exhaust, Honda MSX125 GROM 1st gen.
€64.13
Section, Final, Stainless, MSX125 Grom, suitable for our single high level systems EXPS-0041, EXPS-0042, EXPS-0052 and EXPS-0065.
For EXPS-0066 and EXPS-0067, please see EXPT-0065
TYGA no: EXPT-0037
SKU: MSX-10140 Categories: ALL products, Exhausts, Exhausts, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopTriple clamp set CNC black, Honda NSR250 MC18/MC21
€673.57
CNC machined TYGA triple clamp set for your NSR250 MC21.
These stylish, all aluminium triple clamps are a direct replacement for the MC21 triple clamps, and with the help of FEA testing not only do they look fanstastic, but they perform!
They are delivered ready to fit with all bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-1241Â
SKU: hon-10265 Categories: ALL products, CNC parts, CNC parts, CNC parts, Honda, NSR250 MC18, NSR250 MC21, ShopUndertray race carbon GP-T, Honda NSR250 MC21/MC28
€150.60
Undertray, Race, (Carbon), NSR250 GP-T
This product is to be used with BPFT-9033, BPFT-9133, BPCT-9033 and BPCT-9133 seat cowlings
Also to be used with BPFX-9133 Registration Plate Holder GP-T.
Note the following products are all compatible with the above seat cowlings and are interchangable between the MC21 and MC28
BPFX-9033 Undertray Street GRP
BPCX-9033 Undertray Street Carbon
BPFX-9333 Undertray Race GRP
BPCX-9333 Undertray Race Carbon
TYGA no: BPCX-9333Â
SKU: hon-10466 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, NSR250 MC28, ShopDash Indicator Bulb Harness, MC21
€17.20
This product plugs in line with the wiring connector that connects to the main harness from the left hand handlebar switch and allows the turn signal instrument warning light to function properly when LED turn signals and turn signal relay TELC-0002 are installed. Without this harness, the LED turn signals and turn signal instrument warning light will not flash properly. To install simply unplug the connector at the front of the bike near the master stay and install the TYGA mini harness in line.
This will fit the Honda NSR250 MC21 but also may fit other Honda models.
TYGA no: TYWH-0003
SKU: hon-10747 Categories: ALL products, Honda, NSR250, NSR250 MC21, Various partsCarbon set, Aprilia RS125 (2007-2010)
€412.40
Let you Aprilia Rs125 stand out from the crowd with these beautiful carbon fiber parts, a complete set for the 2007-2010 Aprilia RS125.
Parts are:
Front fender
Rear hugger
Chain guard
Enjoy great savings on product prices and shipping when ordering the parts together in a set instead of separately.
TYGA no: BPFS-0074
SKU: apr-10005 Categories: ALL products, Aprilia, Bodywork and carbon, Carbon, RS125, Shop